Table of Contents
Advertisement
Programming the Flash ROM,
Beep Codes
The bootblock code produces a series of beeps during Flash ROM
programming to: signify completion of a step as shown on the previous
screen or to signal an error.
Error beeps are arranged in a coded sequence and have different
meanings depending on when they occur. The error beep codes and
when they can occur are:
Number of
Beeps
1
Insert diskette in floppy drive A:.
2
The AMIBOOT.ROM file was not found in the root directory
of the diskette in floppy drive A:.
3
Base memory error.
4
Flash program successful.
5
Floppy read error.
6
Keyboard controller BAT command failed.
7
No Flash EPROM detected.
8
Floppy controller failure.
9
Boot Block BIOS checksum error.
10
Flash erase error.
11
Flash Program error.
12
AMIBOOT.ROM file size error.
Continuous
Flash Programming successful. Turn power off. Then turn
beep
power on again to restart.
Chapter 3 Programming the Flash ROM
Continued
Description
77
Advertisement
Table of Contents
