Specifying A Custom Paper For Paper Trays With The Media Identification Unit - Ricoh Pro C7200 Series Cip Training

CIP Training Pro C7200 series
Paper Catalogue Media Identification Unit
8. Change the settings.
9. Press [Save Paper].
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched], or [Textured] and press [Save Paper], a message appears to notify you that the
[Advanced Settings] will be initialized. To apply the changes for those settings, select
[Change]. To cancel the changes, select [Do not Change].
10. Press [Overwrite].
11. Press .
12. Press the [Home] (
Specifying a custom paper for paper trays with the Media Identification Unit
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [Paper Tray] tab.
3. Select the tray to specify the paper settings.
4. Press [Paper Identification].
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
The list of custom paper whose configurations are similar to those of the scanned paper
appears.
6. Select the custom paper you want to use, and then press [Allocate to Tray].
7. Press .
8. Press the [Home] (
DFZ009
) icon at the center bottom of the screen.
) icon at the center bottom of the screen.