Carrier Omnizone 09XC06 Installation, Start-Up And Service Instructions Manual page 18

LEGEND
C —
Compressor Contactor
DISC —
Disconnect
GND — Ground
OFM — Outdoor-Fan Motor
OFR — Outdoor-Fan Relay
PRES —
Pressure Transducer
TB —
Terminal Block
VFD — Variable Frequency Drive
Fig. 12 — Typical Wiring Schematic for Low Ambient Option (09XC12-24 Units)
© 2020 Carrier
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53090029-01
Terminal Block Connection
Marked Terminal
Unmarked Terminal
Splice
Factory Wiring
Field Power Wiring
Printed in U.S.A.
NOTES:
1. Fan motors are inherently thermally protected.
2. Three-phase motors are protected under primary
single phase conditions.
3. Use conductors suitable for at least 194°F (90°C)
when replacing factory wiring.
4. Use copper conductors only.
5. Wiring for field power supply must be rated at 165°F
(75°C) minimum.
Form 09XC-5SI Pg 18 11-20 Replaces: 09XC-4SI