NEC PA1004UL-W Installation Manual page 7

Do not disassemble the projector.
• Do not remove or open the projector's cabinet.
Also, do not modify the projector. There are high voltage areas in the projec-
tor. It may cause fire, electric shock, or laser light leakage, resulting in serious
DO NOT
damage to your eyesight or burns.
DISASSEMBLE
Have qualified service personnel perform inspection, adjustments and repairs
of the interior.
Installing suspended from the ceiling
• When installed suspended from the ceiling, etc. do not hang from the projec-
tor. The projector could drop and cause injury.
• When installing suspended from the ceiling, use a power outlet that is within
CAUTION
reach so the power cord can be easily plugged and unplugged.
Do not place objects in front of the lens while the projector is
operating.
• Do not leave the lens cap on the lens while the projector is operating. The
lens cap could get hot and be warped.
• Do not place objects in front of the lens that obstruct the light while the
PROHIBITION
projector is operating. The object could get hot and be broken or catch fire.
• The below pictogram indicated on the cabinet means the precaution for
avoiding to place objects in front of the projector lens.
CAUTION
FOR HIGH
TEMPERATURE
WARNING
7
Important Information