NEC PA1004UL-W Installation Manual page 5

Safety Cautions
Installing the projector
• This projector is an RG3 product. The projector is for professional use and
BE SURE TO DO
Handling the power cord
• Please use the power cord supplied with this projector. If the supplied power
BE SURE TO DO
• The power cord included with this projector is exclusively for use with this
PROHIBITION
• Handle the power cord with care. Damaging the cord could lead to fire or
HAZARDOUS
VOLTAGE
• Do not touch the power plug should you hear thunder. Doing so could result
must be installed in location where safety is assured. For this reason, be sure
to consult your dealer as installation and attachment/detachment of the
lens unit must be performed by a professional service personnel. Never try
to install the projector by yourself. This may result in visual impairment etc.
cord does not satisfy requirements of your country's safety standard, and
voltage and current for your region, make sure to use the power cord that
conforms to and satisfies them.
projector. For safety, do not use it with other devices.
electric shock.
- Do not place heavy objects on the cord.
- Do not place the cord under the projector.
- Do not cover the cord with a rug, etc.
- Do not scratch or modify the cord.
- Do not bend, twist or pull the cord with excessive force.
- Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.), ask
your dealer to replace it.
in electric shock.
WARNING
• The power cord you use must be approved by and
comply with the safety standards of your country.
Please refer to the page 184 (User's Manual) about
the power cord specification.
For selecting an appropriate power cord, please check
rated voltage for your region by yourself.
5
Important Information