Program the transmitter
July 2020
Figure 5-2: Hold Screen
To hold the outputs and alarm relays:
Procedure
1. Press ENTER/MENU from the main screen to access the Hold screen.
2. Be sure to remove the transmitter from hold once calibration is complete.
5.5
Reset factory default settings
Resetting factory default settings clears all fault messages and returns the display to the
first Quick Start screen.
The Rosemount
•
Reset all settings to factory defaults.
•
Reset sensor calibration data only.
•
Reset analog output settings only.
38
™
T56 offers three options for resetting factory defaults:
Reference Manual
00809-0100-3565
Emerson.com/Rosemount