Enhanced Touch Tracker With Intellex 2.1 - American Dynamics RCTT16BE Installation Manual

Enhanced Touch Tracker with Intellex 2.1

J-Box P8
Color Pin Function
Orange 1 Host A
Yellow 2 Host B
Orange 3 Auxiliary A
Yellow 4 Auxiliary B
Your system supports up to
2 controllers. Terminate E1
on the EIM that is on the
end point of the SensorNet
Network.
Straight-Thru Cable Wiring
EIM DB9F
2 Tx
3 Rx
5 Ground 5 Ground
RCTT16BE VM16 PLUS ENHANCED TOUCH TRACKER
INSTALLATION GUIDE
J-Box P1-P6
Color Pin
Orange 1 SensorNet A
White 2
Red 3
Black 4
Yellow 5 SensorNet B
DB9M
COM 2
2 Rx
3 Tx
Intellex 2.1
(with DB9 Connector)
J-Box #1
Function
28 Vac
Ground
P4
28 Vac
P5
P6
P8
RJ45
RJ45
Primary
Touch Tracker
Straight-Thru Cable
PN: RPNR00
COM 1 DB9 Connector
10 of 15
To Dome
Refer to instructions
included with device.
P1
P2
P3
The maximum combined
SensorNet cable length
is 1000m (3000ft).
Secondary
Touch Tracker
DB9F
Call monitor feature board
is used if Secondary Touch
Tracker is installed.
8000-2672-01, REV. D1