General Control - Sharp XL-1500H Operation Manual

General control

To turn the power on
Press the ON/STAND-BY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STAND-BY button again.
To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER but-
ton on the remote control.
Dimmed
Opening and closing the CD compartment
The CD compartment cover is motorised.
When the power is turned on, you can open or close the CD com-
partment cover by pressing the OPEN/CLOSE button.
Caution:
Do not stop or move the CD compartment cover manually. It may
cause malfunctions to the unit.
Be careful not to jam your fingers in the CD compartment cover.
Opening the control cover
Slide the control cover and use buttons inside.
Keep the control cover closed when the unit is not used.
01/12/3 1500_UK1.fm
XL-1500H
Brightened
13