Setting The Clock And Minute Timer (Some Models) - Electrolux MEF326WGSA Owner's Manual

Setting the Clock and
Minute Timer
(some models)
Figure 1
Figure 2
Your model may be equipped with one of the clocks shown below. Follow the
instructions to set the clock and minute timer on your range.
To Set the Clock
(Figure 1)
When the range is first plugged in, or when the power supply to the range has been
interrupted, "12:00" will flash in the display window.
1. Slide switch C (CLOCK/TIMER) to the CLOCK position.
2. Push in and hold button A (HOUR) until the correct hour appears in the display.
(The numbers will only count forward.)
3. Push in and hold button B (MINUTE) until the correct minutes appear in the
display.
To Set the Minute Timer
1. Slide switch C (CLOCK/TIMER) to the TIMER position, "0:59" (59 MINUTES) will
appear in the display window. The timer can be set for any amount of time from
1 minute to 1 hour and 59 minutes.
2. • To set a time more than 59 minutes, push in and release button A (HOUR). The
display will show the maximum 1 hour and 59 minutes. Adjust the time by
pushing in and holding button B (MINUTE) until the correct time appears in the
display window.
• To set a time less than 59 minutes, push in and hold button B (MINUTE) until
the correct minutes appear in the display. (The minute timer will automatically
start when the button is released.)
3. When the set time has passed, the control will display "0:00" and beep
continuously. Slide switch C (CLOCK/TIMER) to the CLOCK position to cancel
the timer and return to the clock mode.
To Set the Clock
(Figure 2)
When the range is first plugged in, or when the power supply to the range has been
interrupted, "12:00" will flash in the display window.
1. Press button C (CLOCK).
2. Push in and hold button A (HOUR) until the correct hour appears in the display.
(The numbers will only count forward.)
3. Push in and hold button B (MINUTE) until the correct minutes appear in the
display.
To Set the Minute Timer
1. Press button D (TIMER), "0:59." (59 MINUTES) and the minute timer indicator
will appear in the display window. The timer can be set for any amount of time
from 1 minute to 1 hour and 59 minutes.
2. • To set a time more than 59 minutes, push in and release button A (HOUR).
The display will show the maximum 1 hour and 59 minutes. Adjust the time
by pushing in and holding button B (MINUTE) until the correct time appears
in the display.
• To set a time less than 59 minutes, push in and hold button B (MINUTE) until
the correct minutes appear in the display. (The minute timer will automatically
start when the button is released.)
3. When the set time has passed, the control will display "0:00." and beep
continuously. Press button C (CLOCK) to cancel the timer and return to the clock
mode.
5
(Figure 1)
(Figure 2)