Setting Clock & Minute Timer (Some Models); Setting Surface & Oven Controls - Electrolux Electric Range Coil Surface Elements with or without Clock Use & Care Manual

To Set the 4 Button Time of Day Clock (some models)
When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display
window.
1. Push .
2. Push in and hold
To Set the 4 Button Minute Timer
1. Push , "0:00" will appear in the display window. The timer can be set for any amount of time from 00:01 minute to 12:00
hours.
2. Push in and hold
The minute timer will automatically start when the button is released. The ":" will flash to indicate Minute Timer mode.
3. When the set time has passed, the control will display "0:00" and beep three times. The timer will continue to beep until
or is pressed at which time the timer will return to the clock mode.
Note: Push at any time to cancel the timer and return to the clock operation.
To Operate the Surface Elements
1. Place cooking utensil on the surface element.
2. Push in and turn the surface control knob in either direction to the desired setting. Start most cooking operations on a
higher setting and then turn to a lower setting to finish cooking. The control knobs do not have to be set exactly on a particular
setting. Use the settings as a guide and adjust the control knob as needed.
3. When cooking is completed, turn the surface element off before removing the pan. Note: The Surface or Element On
indicator light(s) will glow when one or more surface elements are turned on. A quick glance at this indicator light(s) when
cooking is finished is an easy check to be sure all surface elements are turned off.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top
of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed
too close to the surface elements.
Note: The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for
best cooking results.
Note: The Electronic T ime of
Setting Clock & Minute Timer (some models)
or until the correct time appears in the display.
until the correct amount of time appears in the display.
Setting Surface & Oven Controls
Increases time and
Increases time and
6
":" Flashing indicates
Minute Timer mode
decreases time.
decreases time.