Using Sounds; Setting The Default Sound; Using The Sound Gallery - Universal Remote Control COMPLETE CONTROL MX-980 Programming Manual

Using Sounds

Setting the Default Sound

MX-980 Editor enables any button to have a sound play when the button is pressed. You can set a default
sound for every button throughout the configuration as follows:
1 Click on the View tab and make sure the Properties option is checked.
2 Within the Model Designer, highlight the MX-980 remote.
3 Click on the Properties tab.
4 Click the checkbox for Use when a button is pressed.

Using the Sound Gallery

MX-980 Editor enables you to program any button with as many sounds
as you like. However, for each sound, you must program a delay after
the sound, long enough for the sound to play completely. To use sounds,
click on the Sounds icon in the macro toolbar, or select Sound Gallery
from the Tools Menu. Simply drag a sound into a macro, then place the
optimum delay after each sound.
OpenArchitecture Editing Sounds and Images
COMPLETE
CONTROL
™
51
M
X
9
8
0
C
O
L
O
R
L
C
D
R
E
M
O
T
E