Sharp UX-B30 Operation Manual page 75

Answering with the fax's handset
Important: If a document is loaded in the machine's feeder, remove it before
performing the steps below. (Fax reception is not possible when a document
is in the feeder.)
1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until
the display shows RECEIVING and
then replace the handset.
If RECEIVING does not appear (or if you have set the Fax Signal
Receive setting to NO), press
3
If the other party first speaks with you
and then wants to send a fax, press
after speaking. (Press before
the sender presses their Start key.)
•
When RECEIVING appears in the
display, hang up.
Using TEL Mode
Beep
RECEIVING
to begin reception.
RECEIVING
61