Table of Contents
Advertisement
6
Chapter 2 — Front and Rear Panels
THE FRONT PANEL
Figure 4 — Front Panel Controls and Indicators
The following is a brief overview of the front panel. Refer to
Chapter 4 — Setup and Chapter 5 — Operation for details on fea-
tures and panel functions. Some front panel buttons have two
functions. The primary button function is listed first, followed
by the secondary function in parentheses. Indicator lights
(LEDs) are above each button.
1. FUNCTION (1 CAM) — Clears ALARM or VIDLOSS mes-
sage (if ALARM MESSAGE LATCH menu option is ON).
Provides access to special functions when pressed in com-
bination with other buttons.
FUNCTION+down arrow
FUNCTION+left arrow
FUNCTION+right arrow
FUNCTION+LIVE
FUNCTION+CAMERA
2. VCR VIEW — Press VCR VIEW to display images being
output to the VCR on the main monitor. Pressing VCR
VIEW while in the menu system moves to the next menu.
3. sequence (up arrow) — Press sequence to display se-
quential full-screen images from each camera. This but-
ton is also used in the setup menu to move forward through
available characters or to choose a menu toggle option.
Pressing the up arrow also moves the target cursor up one
row in motion detection setup.
4. 2x2 (down arrow) — Press this button to display images
from four cameras (quad display). Used in the setup menu
Simplex Multiplexer
displays color or gray bar
pattern
displays alarm count screen
OFF or ON for time/date
display
stops one-camera recording
starts one-camera recording
for that camera
Advertisement
Table of Contents
