Maintenance - SMC Networks D-M9K Operation Manual

Maintenance

How to reset the product after a power cut or when the power has been unexpectedly removed
Regarding set up, contents of the program may be maintained by the customer's application systems. Be sure
to confirm safety when returning operation of the actuator because it could have been stopped in an unstable
condition.
Perform the following maintenance regularly to avoid possible danger due to unexpected product malfunction.
Make sure that the Adjustment trimmer of the amplifier unit is set in the correct setting position.
Check if the mounting bracket or mounting screws are loose.
If the mounting bracket or mounting screws are loose, tighten them using the appropriate tightening torque.
Make sure that the cable is not damaged.
A damaged cable may lead to insulation failure. Repair the cable or replace the product.
-32-
No.D-※S-OMG0006-C