Supervised Room Address; Refrigerant Leak Alarm Test - Daikin Madoka BRC1H519W7 Installer And User Reference Manual

15 | About the app

15.5.44 Supervised room address

15.5.45 Refrigerant leak alarm test

Installer and user reference guide
122
▪ Field settings
▪ Power consumption limit
Assign a unique supervised room address to individual indoor units. It is mandatory
to set a unique supervised room address for every indoor unit when the remote
controller is set to "Supervisor" mode. First select an indoor unit by way of its unit
number, then assign a unique supervised room address to it. If the supervised
room address is not set, alarms will not be communicated to the remote controller
in "Supervisor" mode.
To set the supervised room address in the Madoka Assistant app, navigate to R32
refrigerant settings in the Maintenance section under Unit settings. Then, tap
Supervised room address to manage the supervised room address of the indoor
units.
The refrigerant leak alarm can be tested using the Madoka Assistant app.
1 In the app, navigate to R32 refrigerant settings in the Maintenance section
under Unit settings.
2 Tap R32 refrigerant system settings.
3 Tap Test alarm and blinking LED to test the refrigerant leak alarm.
Result: The refrigerant leak alarm starts.
4 Tap Stop testing alarm and blinking LED to stop the alarm.
Result: The refrigerant leak alarm stops.
BRC1H519W+K+S7
Madoka wired remote controller
4P513689-1E – 2020.12