Priority Room Setting - Daikin ARC433B46 User Manual

Si10-416_B

Priority Room Setting

The Priority Room Setting requires initial programming
during installation. Please consult your retailer or dealer for
assistance.
The room designated as the Priority Room takes priority in the
following situations;
1. Operation Mode Priority.
As the operation mode of the Priority Room takes precedence,
the user can select a different operation mode from other
rooms.
〈Example〉
* Room A is the Priority Room in the examples.
When COOL mode is selected in Room A while operating
the following modes in Room B,C and D:
Operation mode in
Room B, C and D
COOL or DRY or FAN
HEAT
AUTO
2. Priority when POWERFUL operation is used.
〈Example〉
* Room A is the Priority Room in the examples.
The indoor units in Rooms A,B,C and D are all operating.
If the unit in Room A enters POWERFUL operation,
operation capacity will be concentrated in Room A. In
such a case, the cooling (heating) efficiency of the units
in Rooms B,C and D may be slightly reduced.
3. Priority when using OUTDOOR UNIT
QUIET (SILENT) operation.
〈Example〉
* Room A is the Priority Room in the examples.
Just by setting the unit in Room A to QUIET operation, the
air conditioner starts OUTDOOR UNIT QUIET operation.
You don't have to set all the operated indoor units to
QUIET operation.
Operation
Status of Room B, C and D when the unit
in Room A is in COOL mode
Current operation mode maintained
The unit enters Standby Mode.
Operation resumes when the Room A
unit stops operating.
If the unit is set to COOL mode,
operation continues. If set to HEAT
mode, it enters Standby Mode.
Operation resumes when the Room A
unit stops operating.
ARC433 Series
377