Introduction; Scope; How Does It Work; First Questions - Behringer Ultradrive Pro DCX2496 Software Manual

DCX.Server 2/DCX.Client 2

1 Introduction

Note: This manual describes the functionalities of the DCX.Server Version V2.x and DCX.Client
V2.x.

1.1 Scope

The DCX software combination DCX.Server and DCX.Client allows an easy Wi-Fi remote
control of your Behringer Ultradrive Pro DCX2496 loudspeaker management system via your
mobile phone, tablet computer or PC.

1.2 How does it work?

The system is divided in two software products. First, the
DCX.Client software. It provides the user interface, like gain
volume slider or mute switches. The client will be installed at
your mobile phone, tablet computer or laptop.
Secondly, the DCX.Server software. The software is installed
at a PC or Laptop. The server receives via Wi-Fi commands
from the Client and controls the DCX 2496 via a USB-RS232
interface
1.3 Good to know

1.3.1 Which operating systems are supported?

The DCX.Client is available for MS-Windows (PC), macOS, iOS and Android
devices. You get it from the app stores and the MS-Windows version from our
download area.
The DCX.Server needs a MS-Windows or Linux incl. WINE computer. Alternative a stand-alone
controller can build with Linux and the Atomic Pi PC. Download from our homepage.
1.3.2 Is it possible to copy the DCX2496 settings like X-Over, EQ, Dyn EQ... to
another DCX2496 device?
Yes. Read the settings from the source device and store via the preset function. Copy
DCX2496 the settings from the source device and copy the preset data to the target device.
Further you can easily reload stored settings, e.g. for different music halls.

1.3.3 Which DCX2496 functionalities are supported?

• Input A/B/C/Sum:
Level, Mute, Delay, EQ 1..9, Dynamic EQ, Sum Level from In A/B/C
o
• Output 1..6:
Level, Mute, Delay (long & short),
o
EQ 1..9, Dynamic EQ,
o
www.stute-engineering.de
4