Defining A Preset; Configuring A Dome Camera; Exporting Video - American Dynamics Intellex Intellex Ultra User Manual

Defining a Preset

1 Click to open the Primary Camera Control menu.
2 Position the camera for your preset.
3 Click to display the preset menu.
4 Select a preset number.
5 Click Define Preset
6 When the Replace Preset? message appears, click Yes to program the preset.
The number of available presets is device-dependent.

Configuring a Dome Camera

Cameras using the VM16, VM16E, USB, and VM96 camera handlers can access the dome
configuration menu (see the Intellex Installation and Configuration Guide). Information appearing
in the menu depends on the dome camera.
1 Select the camera. Click
2 Click Configuration Menu
For Pan, Tilt, Focus, and Zoom primary camera controls, see page 9.
3 Navigate to items in the menu using Pan/Tilt
to modify the values.
4 Accept or reject the modified values.
5 Repeat steps 3 and 4 until the camera is configured.
6 Close the Dome Configuration Menu.

Exporting Video

1 Insert blank CD or DVD media into the drive.
2 From the control bar, click Play to begin playback.
3 Move the slider to the location where video clip
begins.
4 Click to define the beginning of a video clip.
5 Move the slider to the right to select the length of the video clip.
6 Click to define end of video clip.
7 Click Export. A screen appears with exported video clips.
8 Highlight the clip to export.
to define a preset at this index.
.
. Select the items using Focus
Basic Features
. Use Zoom
User's Guide 13