Ashly mXa-1502 Operating Manual page 30

mXa-1502 • Operating Manual
6.3e Settings > Network
Network configuration can be set and saved
as automatic (DHCP) or manual (Static IP).
The device MAC address is also displayed. An
"Identify Device" button pings the device to
visually identify itself by turning its COM LED
on for 10 seconds. The Reset button sets all
network parameters back to defaults.
Ashly AquaControl™ Software
6.3f Settings > Security
There are four levels of security roles: Admin,
Guest Admin, Operator, and View Only.
User accounts are created by the Admin using
the New Profile button, then given a unique
username, security role, and password.
• Admin always has full access.
• Guest Admin can be granted full access,
or any combination of the following
permissions:
- Edit Accounts
- Remote Logout
- Edit Device Misc.
- Event Log Clear
- Event Scheduler edit
- Front Panel Controls edit
- Rear Panel Controls edit
- Network Settings edit
- Paging Ducking edit
- Preset edit
- Preset Recall
- System Time edit
- Trigger Settings edit
- Edit Signal Chain
- Import/Export Setting
• Operator has a reduced list of available
(not shown)
permissions. Each permission must be
authorized by an Admin or a Guest Admin
with "Edit Accounts" permission allowed.
Use the Operator role to deploy Remote
Mixer or Remote DCA control. Operator
permissions include:
- Edit Signal Chain
- Front Panel Controls View
- Preset Recall
- DCA Remote
- Mixer 1-4 Remote
• View Only users are denied working access
to all controls and settings.
30