Ashly mXa-1502 Operating Manual page 28

mXa-1502 • Operating Manual
6.3 Settings
The settings screens are where general settings, panel settings, network settings, and security settings are configured.
6.3a Settings > General Settings
This shows the current device, its firmware/hardware revision, allows naming the device and group, and configures the Real Time Clock. This is also
where you export/import all settings to back up or clone your device, and where you perform
6.3b Settings > Panels > Front Panel
• Enable Front Panel Power Button: On/Off
• Enable Front Panel Lights: On/Off
• Enable Sleep Mode: On/Off, plus sleep time
setting. Note: Sleep time of "0" = 15 seconds.
Ashly AquaControl™ Software
(not shown)
(shown below)
• Enable Power: On/Off
• Enable Software Standby: On/Off
• Rear Panel Standby Pin: engaged/
disengaged
firmware update if one is available on the Ashly website.
• Front Panel LEDs: displays current status
• Front Panel Select Buttons A-D: shows
current assignment status
28