Updating Your Drobo 5C To The Latest Firmware - Drobo 5C Getting Started Manual

13. When the installation completes, you will see the following screen to restart the computer to
finish the installation. Click Restart.
14. Once the computer restarts, launch the Drobo Dashboard application.
15. The application will prompt you to register your Drobo 5C. You can either register it or skip
the step and register it later. Select an option based on you preference.
Note:
We highly recommend to register your product in order to obtain support.
16. Click the Next button to view the All Drobos page. After a few seconds, Drobo "discovers" all
Drobo devices currently connected and displays them on this page.
Note:
After the Drobo Dashboard launches, you may be asked if Drobo can collect anonymous information
on your usage. Click Yes or No, as desired.
17. If you have no Drobo device connected to the computer or powered on, a "No Drobos
Detected" message displays until you do.
18. Your Drobo 5C will not work until you upgrade the firmware.
firmware to the latest version, see

2.4 Updating your Drobo 5C to the latest firmware

When you first receive a new Drobo 5C device, you must use the Drobo Dashboard application to
update it to the latest firmware release.
Drobo 5C Getting Started Guide
Updating your Drobo 5C to the latest
For information on updating the
firmware.
19