Drobo 5C Getting Started Manual page 13

8. In some Windows operating systems, the Windows Access Control dialog box appears, asking
if you want to allow changes to your computer. Click the Allow or Yes button. This installs the
Drobo Dashboard.
9. After the installation is complete, be sure the Launch Drobo Dashboard checkbox is selected
and then, click the Finish button.
10. The Drobo Dashboard application launches and you will be prompted to register your Drobo
5C. You can either register the Drobo 5C or skip the step and register it later. Select an option
based on you preference. The serial number is printed on the compliance label at the bottom
of the device.
Drobo 5C Getting Started Guide 13