Table of Contents
Advertisement
3. Press down the 2 locking clips and pull LVDS cable to release.
4. Slide brackets to detach from Main Board.
5. Locate and remove screws from the Tuner Board and Main Board, then
lift to detach.
6. Install the new Main Board and/or Tuner Board and screws.
7. Reconnect the LVDS Cable and all other connectors.
KDL-60W605B
SECTION 3 - REPAIR INFORMATION
8. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the Sony
Authorized Service Portal website.
a. Insert the USB device with the latest Software into one of the TVs'
USB ports.
b. Connect TV to AC power.
c. Wait at least 20 seconds.
d. Press
e. Wait until the Software update is completed.
9. To access Service Mode, turn TV ON and OFF again then press the
following buttons within 1 second of each other:
DISPLAY
10. When the DIGITAL Menu appears, press
category displays.
DIGITAL
002 MODEL
000 BOARD CHECK
on the remote to turn ON the TV.
POWER
+
5
Channel
Volume
2
SERVICE
POWER
until 002 MODEL
12
Hide quick links:
Advertisement
Table of Contents
