Control Panel And Features - Amana NTW4500X User Instructions

CONTROL PANEL AND FEATURES

This Use and Care Guide covers several different models. Not all models are shown.
Not all features and options are available on all models. Appearance may vary.
1
1 Load Size Control
Use this option to adjust the amount of water used with
your load size. Use enough water to allow the load to
move freely. NOTE: The highest water level will be lower
than that of pre-2011 washers.
2
Wash Temperature Control
Wash Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and cold
water.
Warm and hot water will be cooler than what your
■
previous washer provided.
Even in Cool wash, some warm water is let into washer
■
to maintain a consistent minimum temperature.
NOTE: On some models, the wash temperature is
determined by the selected wash cycle.
Select a wash temperature based on the type of fabric and
soils being washed. For best results, follow the garment
label instructions, using the warmest wash water safe for
your fabric. See "Wash Temperature" Chart.
NOTE: In wash water temperatures colder than 60° F (15.6° C),
detergents do not dissolve well and soils can be difficult to
remove.
2 3 4
3 Extra Rinse (on some models)
If you desire an extra rinse at the end of your regular cycle,
turn the Extra Rinse knob to ON.
On models without the Extra Rinse knob, choose a second
rinse by pushing the Cycle Control knob in and rotating it to
any of the "Rinse" cycle settings.
4
Fabric Softener (on some models)
If using fabric softener, set to ON to ensure proper
dispensing of fabric softener.
5 Cycle Control knob
Select the wash cycle best suited for your type of fabric.
See "Cycle Guide" for more details.
5
3