Add-On Card - ASROCK 1U4LW Series User Manual

3.6 Add-on Card

1. You can install an add-on card to the chassis only when you have a riser card installed on the
server board.
2. Before installing the add-on card, power off the server and unplug the power cord.
Removing the Riser-Card Bracket from the Chassis
1. Remove the screws securing the riser-card bracket on the chassis. Keep the screws for
later use.
2. Lift up the riser-card bracket.
3. Remove the screw securing the blanking plate on the bracket.
4. Slide the blanking plate out sideways.
18
1
1
2
4
3