Add-On Card (Pcie/Gpu Card) - ASROCK 4U4G Series User Manual

4U4G Series

3.7 Add-on Card (PCIE/GPU Card)

The system allows user to install eight full-height single-width PCIE expansion cards or
four double-slot GPU cards.
If there is a hold-down bar affixed on the chassis, please remove it before installing an add-
on card. Be sure to replace the hold-down bar after istalling the add-on cards. Refer to the
section entitled "Hold-Down Bar (for GPU Card)" for more instructions.
1. Release the screw securing the slot cover to the chassis.
2. Remove the slot cover.
1
2
3. Install an add-on card into to the slot.
Note: It needs to remove the two slot covers when installing a double-width PCIe/GPU card.
25