Amana AGR5844VD Installation Instructions Manual
30" (76.2 cm) freestanding gas ranges
Hide thumbs
Also See for AGR5844VD:
- Specifications (2 pages) ,
- Product dimensions (1 page) ,
- User instructions (12 pages)
Table of Contents
Advertisement
30" (76.2 CM) FREESTANDING GAS RANGES
RANGE SAFETY........................................................................................................... 2
INSTALLATION REQUIREMENTS.............................................................................. 4
Tools and Parts.......................................................................................................... 4
Location Requirements.............................................................................................. 4
Electrical Requirements............................................................................................. 6
Gas Supply Requirements......................................................................................... 6
INSTALLATION INSTRUCTIONS................................................................................ 8
Unpack Range ........................................................................................................... 8
Install Anti-Tip Bracket .............................................................................................. 8
Make Gas Connection............................................................................................... 9
Verify Anti-Tip Bracket Location.............................................................................. 10
Level Range ............................................................................................................. 11
Electronic Ignition System ....................................................................................... 11
Replace Oven Racks and Warming Drawer............................................................ 13
Storage Drawer........................................................................................................ 13
Complete Installation ............................................................................................... 13
GAS CONVERSIONS ................................................................................................. 14
LP Gas Conversion.................................................................................................. 14
Natural Gas Conversion........................................................................................... 16
ANTI-TIP BRACKET TEMPLATE ............................................................................. 19
IMPORTANT:
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
W10196161D
INSTALLATION INSTRUCTIONS
Table of Contents
Advertisement
Table of Contents
Related Manuals for Amana AGR5844VD
Summary of Contents for Amana AGR5844VD
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS 30" (76.2 CM) FREESTANDING GAS RANGES RANGE SAFETY... 2 INSTALLATION REQUIREMENTS... 4 Tools and Parts... 4 Location Requirements... 4 Electrical Requirements... 6 Gas Supply Requirements... 6 INSTALLATION INSTRUCTIONS... 8 Unpack Range ... 8 Install Anti-Tip Bracket ... 8 Make Gas Connection... -
Page 2: Range Safety
Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”... - Page 3 In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.
-
Page 4: Installation Requirements
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed Tape measure Marker or pencil Flat-blade screwdriver Pipe-joint compound resistant to LP gas Phillips screwdriver Level masonry drill bit (for... - Page 5 Product Dimensions A. 27 " (69.9 cm) max. depth with handle B. 36" (91.4 cm) cooktop height (max.) with leveling legs screwed all the way in* C. 46 " (119.1 cm) overall height (max.) with leveling legs screwed all the way in* D.
-
Page 6: Electrical Requirements
Electrical Requirements WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. IMPORTANT: The range must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70... - Page 7 Gas Supply Line Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. With LP gas, piping or tubing size can be ½" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.
-
Page 8: Installation Instructions
INSTALLATION INSTRUCTIONS Unpack Range WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from range. 2. Remove oven racks and parts package from inside oven. 3. -
Page 9: Make Gas Connection
5. To mount anti-tip bracket to wood floor, drill two holes at the positions marked on the bracket template. Remove template from floor. To mount anti-tip bracket to concrete or ceramic floor, use a " (4.8 mm) masonry drill bit to drill 2 holes at the positions marked on the bracket template. -
Page 10: Verify Anti-Tip Bracket Location
3. Use a " combination wrench and channel lock pliers to attach the flexible connector to the adapters. Check that connector is not kinked. A. Gas pressure regulator E. Manual gas shutoff valve B. Use pipe-joint compound. F. ½" or ¾" gas pipe C. -
Page 11: Level Range
Level Range 1. Place a rack in oven. 2. Place level on rack and check levelness of range, first side to side; then front to back. 3. If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. - Page 12 Check Operation of Oven Bake Burner 1. Remove the oven rack. 2. To remove the oven bottom: Remove 2 screws at the rear of the oven bottom. Lift the rear of the oven bottom up and back until the front of the panel is away from the front frame. Remove from oven and place on a covered surface.
-
Page 13: Replace Oven Racks And Warming Drawer
Replace Oven Racks and Warming Drawer Replace oven racks in oven cavity. Replace warming drawer. To Replace Warming Drawer: 1. Insert warming drawer into slide rails on sides of drawer opening. 2. Lift front of drawer slightly and push firmly to close drawer. Storage Drawer The storage drawer can be removed. -
Page 14: Gas Conversions
Gas conversions from Natural gas to LP gas or from LP gas to Natural gas must be done by a qualified installer. WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. If connected to LP, have a qualified person make sure gas pressure does not exceed 14"... - Page 15 To Convert Surface Burners 1. Remove burner cap. 2. Using a Phillips screwdriver, remove the burner base. NOTE: Reinstall one of the screws through the range cooktop to hold the orifice spud holder in place while removing and replacing the orifice spuds. A.
-
Page 16: Natural Gas Conversion
To Convert Oven Broil Burner Use a ½" combination wrench to turn the orifice hood down snug onto the pin (about 2 to 2½ turns). IMPORTANT: Do not overtighten. The oven broil burner flame cannot be properly adjusted if this conversion is not made. - Page 17 4. Turn gas pressure regulator cap counterclockwise with a " combination wrench to remove. NOTE: Do not remove the spring beneath the cap. Side view before Side view after A. Plastic cover B. Gas pressure regulator cap with hollow end facing out C.
- Page 18 To Convert Oven Broil Burner Use a ½" combination wrench to loosen the orifice hood away from the pin (about 2 to 2½ turns). The oven broil burner flame cannot be properly adjusted if this conversion is not made. See “Adjust Oven Broil Burner Flame”...
-
Page 19: Anti-Tip Bracket Template
ANTI-TIP BRACKET TEMPLATE Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall. Top edge... - Page 20 W10196161D © 2009. 9/09 All rights reserved. Printed in U.S.A.