Maintenance For Capstan Tilt Adjustment Jig - Panasonic Mini DV Service Manual

2.3 MAINTENANCE FOR CAPSTAN TILT ADJUSTMENT JIG.

1. Keep applying oil for preventive oxidation on base block.
Glove should be used when you apply oil.
2. Do not apply pressure to this jig.
3. If Brightness of LED become weak, Battery (SUM4 X 2) in the top of box
should be changed.
4. Inspect sensor pin regularly as following.
A. Put Gage Block to sensor pin.
B. Confirm LED is lit.
If not, adjust sensor pin by rotating a screw.