Grundig Vision 4 26-4931 T Manual page 27

SPECIAL­SETTINGS
– T he »Searching...« menu appears, and the
search for analogue TV stations begins. This
may take several minutes depending on the
number of television stations received.
Note:
You can stop the search by pressing »İ«.
7
6 Press »İ« to end the setting.
Tuning­the­analogue­television­
channels­by­entering­the­channel­
numbers
1 Open the menu with »İ«.
– T he »PICTURE« menu appears.
2 Select the »CHANNEL SETUP« menu with
– +
» « or » «.
3 Select »Analogue Manual Tuning« with »
or » « and press »●« to confirm.
Λ
Analogue Manual Tuning
System
Current Channel
Fine Tuning
Search
Programme No
Skip
Frequency
Select
4 Select the »Programme No« by pressing »●«
–
and press » « or »
5 Select »Current Channel« with »
6 Press »●« to choose between »S« (special
channel) or »C« (channel).
7 Enter the channel number with »
step by step or with »1...0« directly.
28­
ENGLISH
­-----------------------------------------------------------------------------------------------------
BG
S 21
+ 00
a s
a s
1
Yes
443.25 MHz
Save
Back
Z
Exit
+
« to set the preset.
« or »
V Λ
– +
« or »
Note:
The current system is displayed in the »Sys-
7
tem« line. If the colour and/or sound is not
functioning correctly, select »System« with
» « or »
V
–
with »
8 Press »
z
Note:
To set other television stations, repeat steps
7
4 to 8.
9­Press »İ« to end the setting.
Fine­tuning­analogue­television­sta-
tions
The television automatically tunes itself to the
best possible reception. You may need to fine
tune it manually in areas where the reception is
«
V
poor.
1 Select stations with »1­...­0« directly or step
by step with »
2 Open the menu with »İ«.
– T he »PICTURE« menu appears.
3 Select the »CHANNEL SETUP« menu with
– +
» « or »
4 Select »Analogue Manual Tuning« with »
or » « and press »●« to confirm.
Λ
5 Select »Fine Tuning« with »
–
with » « or »
6 Press »
z
7­Press »İ« to end the setting.
«.
«
«. Select the necessary settings
Λ
+
« or » «.
« (red) to finish the setting.
« or » «.
V Λ
«.
« or »
V
+
«.
« (red) to finish the setting.
«
V
« and set
Λ