Srs Trusurround Xt - Grundig Vision 4 26-4931 T Manual

SETTINGS
Automatic­volume
The television channels broadcast at different
volumes. The automatic volume limiting (AVL)
function means the volume is kept the same when
you switch between channels.
1 Select »AVL« with »
–
»On« with » « or »
Note:
If the »SRS« setting has been selected in the
7
»Sound Mode« line, the »AVL« line cannot
be selected.
Stereo­/­two­channel,­mono
If the device receives two channel programmes,
e.g. a film with the original sound on sound chan-
nel B (display: »Dual II«) and the dubbed version
on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the ste-
reo reception quality is poor.
1 Select »Sound Type« with »
adjust the setting with »
Stereo­width
Widens the audio output for stereo programmes
and improves the sound with mono reception.
1 Select »Sound Mode« with »
– +
2 Press » « or » « to select the setting »Spatial«.
SRS­TruSurround­XT*
SRS TruSurround XT is a patented audio technol-
ogy, which is integrated in the television set and
only requires the built-in speakers to produce a
Surround Sound effect.
1 Select the »Sound Mode« line with »
» «.
Λ
2 Select the setting »SRS« with »
* U nder licence from SRS Labs, Inc.
TruSurround XT, SRS and the
trademarks of SRS Labs, Inc.
14­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
« or » « and then select
V Λ
+
«.
« or » « and
V Λ
– +
« or » «.
« or » «.
V Λ
V
–
+
« or » «.
symbol are
Equaliser
The equaliser offers you four preset sound set-
tings (Music, Sports, Movie and Speech) and
one which you can create yourself (User).
1 Select »Equalizer« with »
firm with »●«.
– The »EqUALIZER« menu appears.
Note:
If the »SRS« setting has been selected in the
7
»Sound Mode« line, the »Equalizer« line
cannot be selected.
2 Select the audio setting »User« with »
+
» « and confirm with »
– The frequency band »120 Hz« is activated.
3 Set the desired value with »
select the next frequency band with »
+
» «.
4 Press »Z« to finish the setting.
TruBass­and­Dialog­Clarity
The »TruBass« setting gives you an increased
bass effect.
»Dialog Clarity« recognises dialogue sections in
audio recordings and improves dialogue repro-
duction.
The two functions can be found on the second
page of the »SOUND« menu.
Note:
The »SRS« setting must be selected in the
7
»Sound Mode« line.
1 Select »TruBass« or »Dialog Clarity« with »
or » «.
Λ
2 Select the setting with »
3 Press »Z« to end the setting.
Concluding­the­settings
« or
i
1 P ress » « to finish the settings.
« or » « and con-
V Λ
–
« or
«.
V
« or » « and
V Λ
–
« or
V
– +
« or » «.
«