Table of Contents
Advertisement
BEFORE STARTING A PROGRAMME
Before you start the selected programme, make
sure that:
•
The filters are clean and correctly installed.
•
The cap of the salt container is tight.
•
The spray arms are not clogged.
•
There is enough salt and rinse aid (unless you
use multi-tablets).
•
The arrangement of the items in the baskets is
correct.
•
The programme is suitable to the type of load
and the degree of soil.
CARE AND CLEANING
WARNING! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
main socket.
Dirty filters and clogged spray arms
decrease the washing results. Make a
check regularly and, if necessary, clean
them.
CLEANING THE FILTERS
The filter system is made of 3 parts.
C
B
A
1. Turn the filter (B) counterclockwise and remove
it.
•
The correct quantity of detergent is used.
UNLOADING THE BASKETS
1. Let the tableware cool down before you
remove it from the appliance. Hot items can be
easily damaged.
2. First remove items from the lower basket, then
from the upper basket.
After the programme is completed,
water can still remain on the inside
surfaces of the appliance.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of food or
soil in or around the edge of the sump.
15
Advertisement
Table of Contents
