Table of Contents
Advertisement
• Ensure the camera is turned on
• Press the on/off button to enter photo mode.
• Press the on/off button again to start taking photos.
STOP CAPTURING TIME-LAPSE PHOTOS
• Press the mechanical button to stop taking photos.
• The camera remains in photo mode. You can still start video recording by
pressing the top capacitive button.
SWITCH BETWEEN INSTA360 APP AND MANTIS CONTROLLER
The Mantis controller will try to automatically connect to the Insta360 Pro/Po2. The
Insta360 Pro/Pro2 only allows one active connection at a time. When the Insta App
is connected, the Mantis controller can't connect. Please use the Mantis controller
web App to disconnect or reconnect the Mantis controller from the camera.
• Connect to Wifi 'Mantis',
• Password 88888888
• Navigate to http://192.168.2.1/
• Follow on-screen instructions.
ADJUSTING RECORDING SETTINGS
• The Mantis controller includes a WiFi Access Point to allow you to view
status, logs, and change settings.
• Connect to the WiFi "Mantis" with password 88888888 (8 times 8).
• Your device may warn you that you do not have an internet connection, ignore
the warning.
• Open the browser, then navigate to
interface.
• Follow on-screen instructions to change settings.
• After changing settings, press "Save".
• The settings will be applied immediately, there is no need to reboot the
controller.
CARE AND MAINTENANCE
1. Soak the enclosure in fresh water after each salt water use, during which all
control buttons/knobs should be operated a few times to avoid the
accumulation of salt residue; wipe the enclosure with a towel before opening.
2. After each day of diving, it is advisable to have the main O-ring in the front
part of the enclosure removed from its groove and inspected for damage. Also
check that the O-ring retains its original circular shape; never stretch the O-
ring excessively or remove it with a sharp object.
All rights reserved. Information and specifications may change at any time without notice.
Version 1.2, 2020-12-02
http://192.168.2.1/
to access the control
8
Advertisement
Table of Contents
