Preparation Before Closing The Enclosure; Button And Led Status Overview - Mantis SUB Owner's Manual

•
Battery life, controller: up to 12 hours

PREPARATION BEFORE CLOSING THE ENCLOSURE

• Ensure the DHCP setting of the Insta360 Pro/Pro2 is set to "Direct".
• Insert the camera into enclosure and ensure the lens is centered.
• Connect the Ethernet cable to the camera.
• Connect battery pack to the tray. You will see the lights on the Ethernet port
turn on.
• The Mantis controller boots (~25 seconds). During booting the LED changes
from red to green to white.
• A white LED signals that the Mantis controller is ready and waiting for
connection to the Insta360 Pro/Pro2.
• The battery pack can power the Mantis controller for 12 hours.
•
The battery pack can also power the Insta360 Pro/Pro2 via the extension
cable and provide up to 30 minutes of additional runtime, depending on
battery and health.

BUTTON AND LED STATUS OVERVIEW

All rights reserved. Information and specifications may change at any time without notice.
Version 1.2, 2020-12-02
5