Audio Settings - Grundig 22 VLC 2000 T Manual

SETTINGS
»MPEG NR.« reduces any interference from
7
artefacts (pixel blocks) from digital stations
with MPEG compression (such as from DVB-
T receivers or DVD players).
You can only change the backlighting if the
7
»Dynamic Backlight« function is switched
off.
5 Press »M« to end the setting.
Audio­settings­
1 Open the menu with »M«.
– The »PICTURE« menu is displayed.
SOUND
Volume
●●●●
Balance
●●●●●●●●●●●
AVL
Sound Type
Sound Mode
Equalizer
Headphone
●●●
Select
2 Select the »SOUND« menu with »
and confirm with »OK«.
Note:
Additional operations are explained in the
7
following sections.
Volume
1 Select »Volume« with »
the setting with » « or »
r
Balance
1 Select »Balance« with »
the setting with » « or »
r
­ - --------------------------------------------------------------------------------------------------------------------------------------
29
0
Off
Stereo
Normal
s
21
Back
Exit
« or »
r
« or » « and adjust
q w
«.
e
« or » « and adjust
q w
«.
e
Automatic­volume
The television channels broadcast at different
volumes. The automatic volume limiting (AVL)
function means the volume is kept the same
when you switch between channels.
1 Select »AVL« with »
»On« with »
Stereo­/­two­channel,­mono
If the device receives two channel programmes,
e.g. a film with the original sound on sound
channel B (display: »Dual II«) and the dubbed
version on sound channel A (display: »Dual I«),
you can select the sound channel you desire.
If the device receives stereo or Nicam pro-
grammes, it switches automatically to stereo
sound (display: »Stereo«).
You can switch the sound to »Mono« if the ste-
reo reception quality is poor.
1 Select »Sound Type« with »
adjust the setting with »
Stereo­width
Widens the audio output for stereo programmes
and improves the sound with mono reception.
1 Select »Sound Mode« with »
2 Press »
« or »
r
«
e
Equaliser
The equaliser offers you four preset sound set-
tings (Music, Sports, Movie and Speech) and
one which you can create yourself (User).
1 Select »Equalizer« with »
confirm with »OK«.
– The »EqUALIZER« menu appears.
2 Select the audio setting »User« with »
» « and confirm with »
e
– The frequency band »120 Hz« is activated.
3 Set the desired value with »
select the next frequency band with »
» «.
e
4 Press » « to save the setting.
Concluding­the­settings
1 P ress »M« to finish the settings.
« or » « and then select
q w
« or » «.
r e
« or »
q
« or » «.
r e
« or »
q
« to select the setting »Spatial«.
e
« or »
q w
«.
q
« or »
q
ENGLISH
« and
w
«.
w
« and
« or
r
« and
w
« or
r
13­