Using External Devices; Dvd Player, Dvd Recorder, Video Recorder Or Set-Top Box - Grundig CINEMO 40 Manual

HDMI1 INPUT
24

USING EXTERNAL DEVICES

DVD player, DVD recorder, video recorder or set-
top box
Note:
Which television socket(s) you connect your external devices to
depends on the sockets the external device is equipped with
and the signals which are available.
Remember that with many external devices, the resolution of the
video signal must be adjusted to the input sockets of the televisi-
on (see the operating manual of the external device). You can
find out which values you need to set by referring to the guideli-
nes in the section about connection options.
Note:
Do not connect any other equipment while the device is switched
on. Switch off the other equipment as well before connecting it.
Only plug the device into the mains socket after you have
connected the external devices.
High definition HD ready
Your television can receive high-definition television signals (HDTV).
You can connect the input sources (HDTV set-top box or HDTV DVD
player) to the
socket (digital HDTV signal).
This ensures that you can view digital HDTV programmes, even if they
are copy-protected (HDCP High-Definition Copy Protection).
Connecting a DVD player, DVD recorder, video
recorder or set-top box
... With a digital audio/video signal
Video signal: digital video; resolution: standard 576p; HDTV 720p,
1080i.
Audio signal: digital audio (stereo, multi-channel compression,
uncompressed).
Preset »HDMI 1« or »HDMI 2«.
Connect the
1
on the television and the corresponding HDMI socket on the
HDMI2 INPUT AUD
external device using a standard HDMI cable (digital video and
audio signal).
»HDMI1 INPUT« socket or the
»HDMI1 INPUT« or
_______________
»HDMI2
INPUT«
»HDMI2 INPUT« socket