Charging Your Nüvi; Changing The Fuse; Removing The Nüvi And; Mount - Garmin nuvi 215 Owner's Manual

Appendix
Charging Your nüvi
• Connect the vehicle power cable
to the mini-USB connector on
your nüvi and to a power outlet
in your vehicle. The vehicle key
may need to be turned to ON/
ACC for the nüvi to charge.
• Connect an AC adapter (optional
accessory) to the nüvi and a wall
outlet.
• Connect your nüvi to a computer
using a USB cable(optional
accessory). The computer must
be on for the nüvi to charge.

Changing the Fuse

CAUtion: When replacing the
fuse, do not lose any of the small
pieces and make sure they are put
back in the proper place.
If your unit will not charge in your
vehicle, you might need to replace
the fuse located at the tip of the
32
vehicle adapter.
1. Unscrew the black, round end
piece, and remove it.
2. Remove the fuse (glass and silver
cylinder), and replace it with a 3 A
fast-blow fuse.
3. Ensure that the silver tip is placed
in the black end piece. Screw on
the black end piece.
Removing the nüvi and

Mount

To remove the nüvi from the cradle,
hold onto the cradle and tilt the nüvi
forward.
To remove the cradle from the
mount, turn the cradle to the right or
left. Apply pressure in that direction
until the cradle snaps off the mount.
To remove the suction cup mount
from the windshield, flip the lever
toward you. Pull the tab on the
suction cup toward you.
nüvi 215 owner's manual