Set-Up And Use; Before First Use; Using Your Steam Generator - Telefunken HappyCare HCCV2 Instruction Manual

Before first use

3. Remove any sticker, protective foil or storage cover from the soleplate.
4. Heat up the iron to maximum temperature and iron over a piece of damp cloth for several
minutes for the purpose of removing any residue on the soleplate according to the section of
"Steam ironing".
NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease after a
short while.
NOTE: Some particles may come out of the soleplate when you use the iron for the first time. This is
normal; the particles are harmless and stop coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam station iron may produce a pumping sound. This
is normal; the sound tells you that water is pumped into the soleplate.
NOTE: During the heating process of the soleplate, there will be little steam coming out from the
soleplate automatically and this phenomenon will continue for about 3 seconds.

Using your steam generator

The appliance has two functions. You can use either as a dry ironing or a steam ironing system. The
details refer to the following:
3. Dry ironing
 Put the iron on the steam station iron's thermal insulating cushion.
 Connect the plug to wall outlet, one "D" sound of buzzer can be heard and the working indicator
starts to illuminate.
 Turn temperature dial to your desired setting, which is depended on the fabric of garment, refer
to IRONING TIPS latter. The soleplate starts to be heated up and the working indicator begins to
flash.
 When the working indicator changes from flashing to illuminating, it means the selected
temperature is reached and you now can start ironing.
WARNING: Never touch hot soleplate at any time before cooling down!
4. Steam ironing
 Grasp the water tank handle with the hand and press the tank release button with one finger to
move out the water tank. Open the filling cap and fill water into the water tank. You had better
use purified water with less calcium particles. After it, close the filling cap. The max capacity of
water tank is 1.8L, the water level shall not be exceeded the MAX mark. Replace the detachable
water tank properly.
 Note: If the tap water in your area is very hard, we advise you to mix it with an equal amount of
distilled water. If the water tank is not properly placed, the iron does not produce any steam.
 Put the iron on the steam station iron's thermal insulating cushion.
 Connect the plug to wall outlet, one "D" sound of buzzer can be heard and the working indicator
starts to illuminate.

SET-UP AND USE

ENGLISH
10