Troubleshooting - Telefunken TECHCLIM9 Manual

TROUBLESHOOTING

Issues
The unit is not working
Bad performance
The unit is too noisy
The remote control is
not working
E1 on LCD display
E2 on LCD display
E3 on LCD display
E4 on LCD display
P1 on LCD display
Caution: when the following abnormalities occur to the air conditioner, shut down and pull out the plug,
and then contact the manufacturer, its after sales service or a similar qualified technician:
• Fuse and switch are often broken.
• Power line is overheating or its coat is naked.
• The body produces abnormal odour.
Possible causes
1: the unit is unplugged
2: No electricity
3: 3 min. timing in progress
4: The selected temperature is closed
to the room temperature
5: The room temperature is below
16°C
6: the fuse is broken
1: The air filter is too dirty
2: The air inlet and outlet grid are
clogged by walls or objects
3: Wrong programming
1: The unit is not placed on a stable
and flat surface
2: The air filter is damaged
1: Remote control and the unit is too
far away
2: Batteries are off
Room temperature sensor issues
Evaporator temperature sensor
issues
Condenser sensor issues
Display panel issue
Water tank is full
1: Plug the unit
2: Check for power
3: Wait for 3 min.
4: Select a bigger temperature
gap
5: Stop using the air con
6. Contact your after sales service
1: Clean the air filter
2: Remove the objects or change
the unit location
3: Switch of the appliance and
restart the setting
1: Place the unit on a stable and
flat surface
2: Change the air filter
1: Get closer to the unit
2: Change the batteries
Switch off the appliance and
switch on after 5 minutes. If it
still not working, contact your
after sales service.
Switch off the appliance and
switch on after 5 minutes. If it
still not working, contact your
after sales service.
Contact your after sales service.
Start the water draining
operation
12
ENGLISH
Solutions