Auto Start Feature; A Note On Standby Mode; Moving The Tea Basket After The Brewing Cycle - Breville BTM800XL Instruction Booklet

One-touch tea maker
Hide thumbs Also See for BTM800XL:
Table of Contents

Advertisement

Available languages

Available languages

AUTO START
iii) Once the Tea Maker is activated
and the correct water temperature
is reached, the Basket will
automatically
lower.
iv) The LCD screen will automatically
commence the 'Brew Time' feature.
This feature counts up to a maximum
of 60 minutes, allowing you to
monitor how long the Basket has
been submerged.
v) Once the desired brew time has
elapsed, press and hold the BASKET
button for 2 seconds. The Basket
will rise.
NOTE:
Once a customized time has been
selected and one tea making or
water heating cycle has been
activated, the customized time will
remain in the memory of the Tea
Maker until you change it. To return
to default settings, see Page 31.
22

AUTO START FEATURE

This feature allows you to program the
specifi c time when the Tea Maker will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the 'Auto Start' Feature
1.
Press and hold the AUTO START
button until the LCD screen displays
the
AUTO START clock symbol
and a blinking CURRENT TIME and
START TIME. The button surround will
illuminate and the tea alert will sound.
2.
To set the CURRENT TIME, press the
left
ARROW UP button to increase
the time, or the left
ARROW DOWN
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
NOTE:
Pressing and holding the
ARROW UP button or
ARROW DOWN button will
increase the scrolling speed.
3.
To set the START TIME, press the right
ARROW UP button to increase the
time, or the right
ARROW DOWN
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
4.
Once current time and start time
are programmed, press either the
fl ashing HOT WATER|Cancel or
TEA|Cancel button to select which
feature you would like to start at the
programmed time.
STANDBY MODE / MOVING THE TEA BASKET
5.
The LCD screen will display the current
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and remain illuminated until the START
TIME is reached, indicating that the
'Auto Start' feature has been activated.
6.
Ensure that the Tea Maker is prepared
with:
a) Suffi cient water in the Glass Jug and
tea leaves in the Basket for the tea
brewing cycle or,
b) Suffi cient water in the Glass Jug for
the water heating cycle.
7.
Once the selected START TIME
is reached, the Tea Maker will
automatically commence the tea
brewing or water heating cycle. During
this time, the AUTO START button
surround will no longer illuminate until
the cycle is complete.
Re-selecting the 'Auto Start' feature
using previous START TIME
1.
Press the AUTO START button
once. The HOT WATER|Cancel and
TEA|Cancel buttons will fl ash.
2.
Press either the HOT WATER|Cancel
or TEA|Cancel button to re-select the
the desired function. The 'Auto Start'
feature has now been re-set.
NOTE:
The 'Auto Start' feature can be
canceled anytime by pressing the
AUTO START button. The LCD
screen will no longer display the
AUTO START symbol and the
AUTO START button surround will
cease to illuminate.

A NOTE ON STANDBY MODE

When the Tea Maker is plugged into a wall
outlet, the LCD screen will illuminate for
3 minutes before entering standby mode.
When in standby mode, the LCD screen
will cease to illuminate.
To re-activate the Tea Maker out of
standby mode, press any button,
except the HOT WATER|Cancel or
TEA|Cancel button on the Power Base.
The LCD screen will re-illuminate.
Pressing either the HOT WATER|Cancel or
TEA|Cancel button will start the respective
operation immediately.
MOVING THE TEA BASKET AFTER
THE BREWING CYCLE
After the brewing cycle is complete, you
may wish to lower the Tea Basket again
for extra infusion to produce a stronger
tasting tea. To do this, press and hold the
BASKET button for 2 seconds. The button
surround will fl ash and the Tea Basket will
automatically lower to the bottom of the
Glass Jug.
Once the desired strength has been
reached, press and hold the BASKET
button for 2 seconds. The button
surround will fl ash and the Tea Basket will
automatically rise to the top of the
Glass Jug.
NOTE:
If the Glass Jug is removed from
the Power Base and the Tea Basket
is in the lowered position, it will
automatically return to the top
upon return of the Glass Jug to the
Power Base.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

One-touch btm800xl

Table of Contents