Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) Meiyi Printing Factory, Dalian, China No. 28 Chang Qing Street, Xi Gang District, Dalian, China ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH...
The CHA-S634 model can be connected to the M-Bus model Head Unit using the optional M-Bus/Ai-NET compatible cable. (KCA-130B) Changeurs de CD Alpine : vous avez le choix! Plus de sélections musicales, plus de souplesse, plus de confort. Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK et CD TEXT.
Subwoofer On and Off ... 4 Adjusting Volume/Balance (Between Left and Right)/Fader (Between Front and Rear) ... 5 Turning Loudness On/Off (CDM-9821 only) ... 5 Audio Mute Function ... 5 BBE Mode On/Off (CDM-9823 only) ... 5 Setting the AUX Mode ... 5 Displaying Time ...
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing. PRECAUTIONS Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your...
Use of special shape discs may cause damage to the mechanism. Installation Location Make sure the CDM-9823/CDM-9821 will not be installed in a location subjected to: • Direct sun and heat • High humidity and water •...
The very first time the power is turned on, the unit will be in the tuner mode at volume level 12, with BBE* or the LOUD** function on. * CDM-9823 only. ** CDM-9821 only. Subwoofer On and Off Press and hold the F/SETUP button for at least 3 seconds.
Turn the Rotary encoder until the desired sound is obtained in each mode. Turning Loudness On/Off (CDM-9821 only) Loudness introduces a special low- and high- frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.
Basic Operation BAND Rotary encoder CENTER f Displaying Time Press the DISP button repeatedly until the clock time is displayed. Each press changes the modes as follows: Radio mode Clock priority ↔ Radio frequency mode CD Player and Changer modes Track No.
Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. Press the CENTER f button to select the Treble setting mode. Each press changes the modes as follows: Bass setting Treble setting → →...
Radio Operation SOURCE/ POWER TUNE/A.ME BAND F/SETUP Preset buttons (1 through 6) Changing the Radio Frequencies for each Country For customers not living in North America, change the radio frequencies as follows. Press and hold the F/SETUP button for at least 3 seconds.
Automatic Memory of Station Presets Press the SOURCE/POWER button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. Press and hold the TUNE/A. ME button for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress.
CD Player Operation Disc Select buttons SOURCE/ (1 through 6) POWER About playable media. Use only compact discs with the label side showing the CD logo marks below. If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CD- ReWritable) for audio use on this unit.
In CD changer mode, press the "F" button to illuminate the "FUNC" indicator and go to step 1. Controlling CD Changer (Optional) If an optional Alpine 6-disc CD Changer is connected to the 8-pin DIN connector (M-Bus) of the CDM-9823/CDM-9821, you can control the CD changer using the CDM-9823/CDM-9821.
- Change the disc. • The pick-up lens is dirty. - Do not use a commercial available lens cleaner disc. Consult your nearest ALPINE dealer. CD playback sound skips without vibration. • Dirty or scratched disc. - Clean the disc; damaged disc should be replaced.
E - 01 • Malfunction in the CD Changer. - Consult your Alpine dealer. Press the magazine eject button and pull out the magazine. Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer.
(e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDM- 9823/CDM-9821 to the fuse box, make sure the fuse for the intended circuit of the CDM-9823/CDM-9821 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDM-9823/CDM-9821. Connect all other leads of the CDM-9823/CDM-9821 according to details described in the CONNECTlONS section.
Installation and Connections Connections Blue Blue/White Yellow Black (CDM-9823 only) ∗ When Subwoofer is set to OFF: Output is from Rear speakers. When Subwoofer is set to ON: Output is from Subwoofer. For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 4. POWER ANT REMOTE TURN-ON...
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis. • If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information.
GARANTIE LIMITÉE Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter l'un de nos concessionnaires ou appeler directement Alpine au numéros Liste ci-dessous.
LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.