(Cde-7859 Only); Setting The Bass Control (Cde-7859 Only); Setting The Treble Control (Cde-7859 Only); Setting Bass Frequency (Cde-7858/Cde-7856 Only) - Alpine CDE-7856 Owner's Manual

Basic Operation
g DN
f UP
Setting the Bass Control

(CDE-7859 only)

You can change the Bass Frequency emphasis to
create your own tonal preference.
1
Press the BASS C. button to turn on the Bass
setting mode.
2-1
Setting the Bass frequency:
Press the g DN or f UP button to select
the desired Bass center frequency.
60Hz 80Hz
Emphasizes the displayed Bass frequency
ranges.
2-2
Setting the Bass Band Width (Q-Factor):
Press the BAND button to select the desired
Bass Band Width.
WIDE1 WIDE2
...........................
(Wide)
Changes the displayed frequency's band width to
narrow or wide.
2-3
Setting the Bass Level:
Press the 5 5 5 5 5 or 6 6 6 6 6 button to select the desired Bass
Level (-7~+7).
You can emphasize or weaken the bass
frequency.
NOTE
If no buttons are pressed within 5 seconds, the Bass
control setting will be turned off automatically.
8
-EN
2 2 2 2 2
BAND
BASS C. TREBLE C.
(CDE-7859 only)
100Hz 200Hz
WIDE3 WIDE4
(Narrow)
1 1 1 1 1
(CDE-7859)
Setting the Treble Control
(CDE-7859 only)
You can change the Treble Frequency emphasis
to create your own tonal preference.
1
Press the TREBLE C. button to turn on the Treble
setting mode.
2-1
Setting Treble frequency:
Press g DN or f UP button to select the
desired Treble center frequency.
10kHz 12.5kHz
Emphasizes the displayed Treble frequency
ranges.
2-2
Setting Treble Level:
Press the 5 5 5 5 5 or 6 6 6 6 6 button to select the desired
Treble Level (-7~+7).
You can emphasize the treble frequency.
NOTE
If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
Setting Bass Frequency
(CDE-7858/CDE-7856 only)
The bass control center frequency can be set at
60, 80, 100 or 200 Hz.
1
Press and hold the BASS C. button for at least 3
seconds to turn on the bass control settings.
2
Press the g DN or the f UP button to
select the desired Bass center frequency.
Each press changes the center frequency as
follows: 60 Hz, 80 Hz, 100 Hz and 200 Hz.
NOTE
If no buttons are pressed within 5 seconds, the bass
control settings will be turned off automatically.
3
Press the BASS C. button for more than 3
seconds to turn off the bass control settings.
15kHz 17.5kHz