Related Manuals for Pentair MICROBRITE
Summary of Contents for Pentair MICROBRITE
- Page 1 MICROBRITE® COLOR LED LIGHT FOR POOL AND SPA INSTALLATION AND USER’S GUIDE Compact LED light for 1.5" pool wall fitting 620424-EU IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS / SAVE THESE INSTRUCTIONS G-INSB-MICRO-A...
- Page 2 Pentair thanks you for placing your trust in the company and purchasing MICROBRITE®, the Compact LED light for 1.5" pool wall fitting. Please carefully read this user manual to fully benet from all of the functions of MICROBRITE®. Store it carefully so that it can be consulted at any time.
-
Page 3: Table Of Contents
CUSTOMER SERVICE / TECHNICAL SUPPORT If you have questions about ordering Pentair Aquatic Systems, (“Pentair”) replacement parts, and pool products, please use the following contact information: Customer Service Technical Support +39 050716166 / +39 050716169 e-mail: techsupport.poolemea@pentair.com orders.pooleu@pentair.com Hotline: +33 184280940 poolemea@pentair.com... -
Page 4: Important Warning And Safety Instructions
Note: Connect both wires to the corresponding circuit wires in the junction box (brown wire to power, and blue wire to common) FIXED POOL AND SPA LUMINARIES SPECIFICATION: 12 VAC 50/60 Hz. MicroBrite color led light for pool and spa Installation and User’ s Guide... -
Page 5: Global Presentation
MICROBRITE® COLOR LED LIGHT OVERVIEW This manual describes how to install, replace and operate the 12 VAC MicroBrite Color for pool and spa. The MicroBrite Color light provides brilliant vivid multi-colors with spectacular effects for your pool. Choose one of the seven pre-programmed color light shows or select one of the five fixed colors to create virtually endless range of dramatic underwater lighting effects for a spectacular effect in your pool and spa. -
Page 6: Light Installation
542404 CMP25550000000 The MicroBrite light adaptor allows the mounting of the MicroBrite light in the 1.5” return fitting. Refer to the compatible MicroBrite light wall fittings table above. MicroBrite color led light for pool and spa Installation and User’ s Guide... - Page 7 WET CONDUIT INSTALLATION Note: MicroBrite lights are shipped from the factory with the white threaded adaptor ring pre-installed onto the body of the light. The male threads on the white threaded adaptor ring allow the light to be threaded into the female threads of most 1.5”...
- Page 8 LIGHT INSTALLATION 6. Insert the MicroBrite light into the 1.5” wall fitting. By hand start the process of threading the male threads on the MicroBrite’ s white threaded adaptor ring into the female threads of the wall fitting. Insert adaptor male thread adaptor ring into female thread of wall fitting.
- Page 9 1.5" Standard wall fitting Install O-Ring then apply provided Adaptator lubricant to seal fitting and conduit from water entry Adaptator Adaptator (final location) O-Ring O-Ring (final location) MicroBrite color led light for pool and spa Installation and User’ s Guide...
-
Page 10: Electrical Connection
When using multiple MicroBrite 12 VAC ~ lights on a 100 Watt safety isolation transformer, it is recommended that no more than six (6) MicroBrite color lights be used. For long cable lengths for each light, it is recommended not to exceed 45 m of total cable run between the 12 VAC isolation transformer and the MicroBrite color light. - Page 11 SELECTING A MICROBRITE COLOR LIGHT SHOW MODE OR FIXED COLOR USING A WALL SWITCH MicroBrite color lights are compatible with IntelliBrite® Color Light shows and can be synchronized with IntelliBrite color lights. First switch power on to the light. A white light will momentarily illuminate, followed by the previously selected color.
- Page 12 The color mode selections start in a clockwise direction from the 9 o’ c lock position. MicroBrite color led light for pool and spa Installation and User’ s Guide...
- Page 13 • 1 push = fixed color / sequence • 2 pushes = save actual color as user defined color (sequence mode only) Next color scheme Previous color scheme MicroBrite color led light for pool and spa Installation and User’ s Guide...
- Page 14 “IntelliBrite” and then save. that may change with impulses, on the Home menu, selecting Lighting and validating the cho- sen light programme type (color mode / mono or party ...). MicroBrite color led light for pool and spa Installation and User’ s Guide...
-
Page 15: Troubleshooting
620428-EU MicroBrite White Light 12 VAC - 602158Z Installation Tool (replacement) 3 meter cord 620463 Conduit Seal O-Ring (replacement) 620457-EU MicroBrite Warm White Light 12 VAC - 3 meter cord MicroBrite color led light for pool and spa Installation and User’ s Guide... -
Page 16: Maintenance
8. Final check: See page 5 for final check instruc- from the wall fitting. tions. 4. Slowly pull the light and attached power cord (with attached fish tape) out of the wall fitting. Pull the MicroBrite color led light for pool and spa Installation and User’ s Guide... -
Page 17: Technical Drawings
INSTALLATION TOOL INSTALLATION TOOL ø 46.2 mm (1.82”) 76 mm (3.0”) SECTION VIEW THREADED ADAPTER ø 46.2 mm (1.82”) FITS 1-1/2” NPT & NPS THREADS 12 mm (0.5”) MicroBrite color led light for pool and spa Installation and User’ s Guide... - Page 18 WWW.PENTAIR.COM All indicated Pentair trademarks and logos are property of Pentair Inc. or its global affiliates in the U.S.A and/or other countries. Third party registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.