Display & Button Setup - Kenwood DMX9720XS Instruction Manual

Display & Button Setup
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears. h
4
Touch [Display & Button].
h Display & Button setting menu appears.
h
5
Set each parameter as follows.
■ [Dimmer]
Select the dimmer mode.
[OFF]: Does not dim the display and buttons.
[ON]: Dims the display and buttons.
[SYNC ](Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
[OSD Clock]
■
Select if you want to display the clock while
the screen is off, or while watching video files
on USB, etc.
"ON" (Default)/"OFF"
[Button Illumination Colour]
■
You can set the button illumination color.
(P.55)
[Wallpaper Customize]
■
You can change the wallpaper image or
color. (P.56)
[Screen transition effect]
■
Select whether to use the screen transition
effect when the source control screen is
switched to the Home screen.
"ON" (Default)/"OFF"
Ñ
Customizing the button color
You can set the button illumination color.
1
Touch [Button Illumination Colour] in the
Display & Button setting menu.
2
Touch the desired color.
■ [Variable]
You can set the button color to continuously
scan through the color spectrum.
■ [User]
You can set the color created with the RGB
color mixer.
[Car Colour] (DMX9720XDS only)
■
This can be selected when the iDatalink
(commercially available) is connected.
3
Touch [
].
To register an original color
You can register your original color.
1
Touch [User] on the Button Illumination
Colour screen.
2
Use [-] and [+] to adjust each color value.
3
Touch [
].
NOTE
• You can create a color based on a preset color.
Touch the preset color instead of [User], and
adjust the color value.
Setup
55
English