Unit Specifications - Omron NXR-ILM08C-EIT Manual

Unit Specifications

Item
IO-Link connector type
Number of ports
Baud rate
IO-Link specifications
Cable specifications
Unit/input power supply voltage
Output power supply voltage
Maximum power supply current
Number of connected Units when supplying power
with through-wiring
Mounting method
Mounting strength
Installation orientation and restrictions
Connector types
Connector strength
Screw tightening torque
Maximum port current
Power supply used
Rated voltage
Device power supply *1
in IO-Link Mode or Maximum load current
SIO (DI) Mode
Short-circuit protection
Short-circuit detection
Power supply used
Rated voltage
Internal I/O common
Input current
Digital inputs for pin 4 or
ON voltage/ON current
digital inputs for pin 2
(in SIO (DI) Mode)
OFF voltage/OFF current
ON/OFF response time
Input filter time
Short-circuit protection
Short-circuit detection
Class A
8
COM1: 4.8 kbps
COM2: 38.4 kbps
COM3: 230.4 kbps
• Cable type
• Cable length
• Electrostatic capacity between lines : 3 nF max.
• Loop resistance
24 VDC (20.4 to 26.4 VDC)
24 VDC (20.4 to 26.4 VDC)
9 A
Sum of Unit/input power supply current and output power supply current
No restrictions if power supply specifications are met.
Mounting with M5 screws
100 N
Installation orientation: 6 possible orientations
Restrictions: No restrictions
• EtherNet/IP communications connectors : M12 (D-coding, female) × 2
• Power supply connectors : 7/8 inch (male) × 1, 7/8 inch (female) × 1
• I/O connectors : M12 (A-coding, female) × 8
30 N
Applicable to all connectors
• EtherNet/IP communications connectors and I/O connectors
(M12 screw)
• Power supply connectors (7/8 inch screw)
• Unit mounting (M5 screw)
• Rotary switch cover (M3 screw)
• Waterproof covers for EtherNet/IP communications connectors
(M12 screw)
• Waterproof covers for power supply connectors
(7/8 inch screw)
4 A/port
Total available current between pin 1 and pin 4
Unit/input power supply
24 VDC (20.4 to 26.4 VDC)
2 A/pin
Provided *2
Provided *2
Unit/input power supply
24 VDC (20.4 to 26.4 VDC)
PNP
• Digital inputs for pin 2: 3.0 mA (at 24 VDC)
• Digital inputs for pin 4: 6.3 mA (at 24 VDC)
• Digital inputs for pin 2: 15 VDC min., 2 mA min.
• Digital inputs for pin 4: 15 VDC min., 3 mA min.
5 VDC max., 1 mA max.
1.0 ms max.
No filter, 0.25 ms, 0.5 ms, 1 ms (default), 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms,
128 ms, 256 ms
Provided *2
Provided *2
NXR-ILM08C-EIT
Specification
: Unshielded
: 20 m max.
: 6 Ω max.
: 0.5 to 0.6 N·m
: 1.5 to 1.7 N·m
: 1.47 to 1.96 N·m
: 0.4 to 0.6 N·m
: 0.5 to 0.6 N·m
: 1.5 to 1.7 N·m
9