Alphasmart Dana Addendum page 16

WiFile application
To set up a WiFile connection:
1. Make sure you've set up your Dana for wireless connectivity through an access
point (as described in "Access points" on page 8), and that you're physically
within range of the access point.
2. From the Applications Launcher, tap WiFile to launch the WiFile application.
WiFile starts and displays the New Connection dialog box. (If the dialog box
doesn't appear, Tap New.)
3. Type the name or IP address of the server.
4. Tap the down arrow next to the Share field. WiFile searches for shares on the
server whose name or IP address you specified.
5. When it appears in the Share field, select the share and tap OK.(If you have more
than one share available, select it from the list before tapping OK.) The share name
appears in the WiFile connection list.
16 Dana System Software 1.5 Addendum