Alphasmart Dana Addendum page 12

Wireless connectivity and WiStat changes
3. Tap to select an access point in the list, then click Next. A setup screen appears,
displaying the name of the access point. (If WEP security has been enabled, or if
you chose a static IP rather than DHCP, then additional information is required.)
4. Select a profile from the list with which to associate the access point, then tap
Finish.
You're returned to the WiStat application. You can now connect to your network or
the Internet with the access point you chose.
5. Press apps to return to the Applications Launcher.
Note:
When you set up an access point using this method, you create a profile
with the default settings of DHCP addressing and no WEP security. If you want to
change these settings, you can simply edit the profile and add the required
information.
12 Dana System Software 1.5 Addendum