Alphasmart Dana Addendum page 15

The following diagram shows the general tasks involved, and the order to accomplish
them, to get WiFile up and running.
1
Create
shares and
place files
within
them
Visit the
Support section
of the
AlphaSmart
web site
Creating a WiFile connection
To start sharing files with WiFile, you must first set up at least one connection within
WiFile. Once you've set up a connection, you open it when you're ready to work with
the files.
You'll need the name of the network server or computer in order to set up the WiFile
connection. Alternatively, you can use the IP address of the server or computer to set
up the connection. Your system administrator can provide you with this information.
Dana System Software 1.5 Addendum
2
Set up a
wireless
connection
on your
Dana
Refer to
"Access points"
on page 8
3
Create a
WiFile
connection
Refer to
"Creating a
WiFile
connection" on
page 15
WiFile application
4
Open a
WiFile
connection
and work
with files
Refer to
"Working with
connections"
on page 18
15