Proper Use; Technical Data - Parkside PFMR 1400 A1 Original Operating Instructions

4. Proper use

The machine has been designed to mix liquid
and powderery building materials such as paint,
mortar, adhesive, plaster and similar substances.
The relevant mixing action (which depends on the
consistancy of the materials and the quantity that
has to be mixed) must be set up for the appropri-
ate mixing tool.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Mains voltage: ...............................230 V ~ 50 Hz
Power input: .............................................. 1400 W
Idling speed: .........................................0-750 min
Mixing tool mount: ...........................................M14
Protection class: ................................................II/
Weight excluding mixing tool: ................. 3.85 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ....................... 84.5 dB(A)
pA
K uncertainty .................................................3 dB
pA
L sound power level .........................95.5 dB(A)
WA
K uncertainty ................................................3 dB
WA
Wear ear-muffs.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Anleitung_4258592_LB4.indb 10 Anleitung_4258592_LB4.indb 10
GB
Mixing of paint and mortar
Vibration emission value a
h
K uncertainty = 1.5 m/s 2
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful effect.
Keep the noise emissions and vibrations
to a minimum.
•
Only use appliances which are in perfect
working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appli-
ance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
-1
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool
in accordance with instructions, certain
residual risks cannot be rules out. The fol-
lowing hazards may arise in connection
with the equipment's construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
- 10 -
= 2.92 m/s 2
18.11.11 09:49 18.11.11 09:49