Setting The Date And Time; Inserting A Disc - Sony MVC-CD200 Service Manual

Setting the date and time

When you first use your camera, set the date and time. If these are not set, the
CLOCK SET screen appears whenever you turn on your camera.
1
Set the mode dial to , S, A, M,
2
Push the POWER switch in the arrow direction to turn on the
power.
The POWER ON/OFF (CHG) lamp (green) lights up.
The CLOCK SET screen appears.
When resetting the date and time once you set, set the mode dial to SET UP
(page 84), and then follow the procedure from step
3
Select the desired date display format with
v / V on the control button, then press the
z
center .
Select from [Y/M/D] (year/month/day), [M/D/Y]
(month/day/year), or [D/M/Y] (day/month/year).
4
Select the year, month, day, hour or minute
b B
item you want to set with / on the control
button.
v V
The item to be set is indicated with /
14

Inserting a disc

You can use only the 8 cm CD-Rs or 8 cm CD-RWs that have these
marks.
1
Disc cover
OPEN lever
Lock tab
1
While sliding the lock tab to the left, slide down the disc cover
OPEN lever.
Open the disc cover by your hand after the cover is unlocked.
2
Place a disc with the printed side up.
Push down the center of the disc until it clicks. When installing, do not push
with too much force and do not touch the pickup lens.
3
Close the disc cover.
16
1
2
POWER ON/OFF (CHG) lamp
3 – 6
, SCN, or .
3
.
CLOCK SET
Y/M/D
M/D/Y
D/M/Y
2001 / 1 / 1 12 : 00 O K
AM
CANCEL
OK
CLOCK SET
Y/M/D
M/D/Y
.
D/M/Y
2001 / 1 / 1 12 : 00 O K
AM
CANCEL
OK
2
Pickup lens
Push here
Disc
5
Set the numeric value with
control button, then press the center
enter it.
v
After entering the number,
item. If you selected [D/M/Y] in step
time on a 24-hour cycle.
6
B
Select [OK] with on the control button,
z
then press the center
moment to begin clock movement.
The date and time are entered.
To cancel the date and time setting
v V b B
Select [CANCEL] with / / /
Removing the disc
While sliding the lock tab to the left, slide down the disc cover OPEN lever, and open
the disc cover after the cover is unlocked. Then, remove the disc as illustrated below.
Notes
• Before removing the disc, be sure to check that the disc is not rotating.
• Do not open the disc cover while the ACCESS lamp is lit. If you do, the recorded image may be
damaged or the disc may become unusable.
• When writing data on a disc or connecting with a computer using the USB connection, the disc
cover OPEN lever is locked.
1-3
v / V on the
z to
CLOCK SET
Y/M/D
M/D/Y
V
/ moves to the next
D/M/Y
3
, set the
2001 / 7 / 1 12 : 00 O K
AM
CANCEL
OK
at the desired
CLOCK SET
Y/M/D
M/D/Y
D/M/Y
2001 / 7 / 4 10 : 30 O K
PM
CANCEL
OK
z
on the control button, then press the center .
15
17