Sony ILCE-6500 Manual page 402

Use the blower to clean the image sensor surface and the surrounding area.
5
Attach the lens.
6
Hint
For how to check the amount of dust on the image sensor, and for further details on cleaning
methods, please refer to the following URL.
http://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php
Note
Clean the image sensor quickly.
A blower is not supplied with this product. Use a commercially available blower.
Cleaning can be performed only when the battery level is
The use of an AC-PW20 AC Adaptor is recommended.
Do not use a spray type blower as it may scatter water droplets inside the camera body.
Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower
does not touch the image sensor.
Hold the camera slightly face downward so that the dust falls out.
Do not subject the product to any shock during cleaning.
When cleaning the image sensor with a blower, do not blow too hard. If you blow the sensor too
hard, the inside of the product may be damaged.
If the dust remains even after you cleaned the product as described, consult the service facility.
[449] Precautions/This product
(3 remaining battery icons) or more.